OPERATION

In this case, you also need to consider if the IR (10) is available.

Fig. 4

-When the display turns downward to a certain angle, it will draw in.

Fig. 5

SELECTING RECEIVING MODE Press TV/AV button (22) to select among AV1/AV2/TV.

SELECTING CHANNEL

-Press CH + button (28) or CH – button (29) to choose channel upward or downward.

-The numeric buttons (0, 1 ~ 9) (23) allow you to select the correspinding channel directly.

-Press digital select button (-/--) (24) cooperatively used with numeric buttons to select channel desired.

PICTURE ADJUSTMENT/PROGRAM SETTING/SYSTEM CONTROL

In TV mode, press MENU button (36) to enter the main menu. And the menu includes three sub-menus:

PICTURE MENU, TUNER MENU and

SYSTEM MENU.

Press the button repeatedly or press

/ buttons (37) to select the desired item then press / buttons (38) to enter the corresponding sub-menu to set.

- In PICTURE MENU, use / buttons (37) to select picture mode upward or downward as follows:

BRGIHT CONTRAST COLOR SHARP TNIT

Then use / buttons (38) to adjust the selected item.

Note: In PAL SYSTEM, there is no “TINT” item.

-In TUNER MENU, use / buttons (37) to select picture mode upward or downward as follows:

POS SKPI BAND FNIE AFT SEARCH ASM

Then use / buttons (38) to adjust the selected item.

-In SYSTEM MENU, use / buttons (38) to select picture mode upward or downward as follows:

COLOR SOUND LANG. B/B CORNIG HALFTONE

Then use / buttons (38) to adjust the selected item.

In AV mode, press MENU button (36), the screen will display PICTURE MENU and SYSTEM MENU but not TUNER MENU. And in SYSTEM MENU, there is no “SOUND” item. The setting method is the same with that in TV mode.

Note: In the menus (except TUNER MENU), if you don’t operate over 6 seconds, the screen display will disappear.

13

Page 13
Image 13
PYLE Audio PLTV64R owner manual Selecting Channel, Picture ADJUSTMENT/PROGRAM SETTING/SYSTEM Control