PYLE Audio PLTV64R owner manual Radio Operation, CDC Operation

OPERATION

RADIO OPERATION

•SELECTING BAND

Press BND button (11) to change between three FM bands and two AM bands and one LW band. Each band stores up to six preset stations.

FM1FM2 FM3AM1/MWAM2/LW

•SELECTING STATION

During radio mode, press TUNE/SKIP

button (13) to increase frequency or TUNE/SKIP button (14) to decrease frequency by one step of channel spacing. Hold the button longer for fast tuning. The frequency is updated correspondingly on display.

•SELECTING MEMORY

Press preset memory buttons (15) to preset stations at tuner mode.

With this system, a total of 30 stations can be stored in the memory of six buttons. The stations might be FM1, FM2, FM3, AM1/MW and AM2/LW band. The operation is as below:

-Store in Memory

Press and hold desired memory location button for several seconds. The current listening station will be stored into the number button.

-Retrieve a Preset Station

Press any one of the buttons (15) to retrieve a station which had been stored in the memory in advance the chosen number is shown on display.

•AUTO MEMORY STORING & SCANNING

-Auto Memory Storing

Seeks the six strongest stations in the pre-selected band automatically and stores the stations automatically in preset memories. Initially the tuner seeks and memories the stations in local mode until 6 stations are fully occupied. Otherwise, seeking is proceeded in distance mode.

-Auto Memory Scanning

Check the stations stored in the preset memories. Press to retrieve automatically the current stations stored in six preset memories and it will display for several seconds. Press either the AS/PS button (16) again or anyone of the memory buttons to stop the scan operation. During the preset scan operation, the channel number flashes on the display for several seconds.

Preset station scan continuously in the pre-selected band.

CDC OPERATION

•SELECTING TRACK

During CDC mode, press TUNE/SKIP

button (14) or TUNE/SKIP button (13) to move to the previous track or the next track. The track number shows on the display.

•SELECTING CD

Press CD + button (17) to select next disc and CD – button (18) to select previous disc.

•REPEAT THE SAME TRACK

Press RPT button (19) to continuously repeat the same track on the current disc. Press it again to continuously repeat all tracks on the current disc. Press it the third time to stop repeating.

•PREVIEW ALL TRACKS

Press SCN button (20) to play the first several seconds of each track on the current disc. Press it again to stop intro and listen to track.

•PLAY ALL TRACKS

Press RND button (21) to play all tracks on the current CD in random order. Press it again to cancel the mode.

11