PYLE Audio PLVS7HM manual Step of install sun-visor housing, Cut the visor

Step of install sun-visor housing

Setup work

remove the visor and set it in an uncluttered work area. Take the appropriate precautions to ensure that it is not damaged during the installation.

Measurements

Push on the headrest with your fingers to make sure there are no obstructions that would hinder the installation. Use the paper template to mark the area to be cut.

Cut the visor

using an adjustable-depth blade, start your cut 1/4 inch inside one corner and cut diagonally across, stopping 1/4 inch in from the other corner. Repeat the procedure for the other two corners.

9