![](/images/new-backgrounds/1141225/14122513x1.webp)
Installation
Power Cord
(Female)
Video 1 input (red)
Video 2 input (yellow)
Ground (black)
DC 12V power input (red)
Remote Control replacing batteries
PULL OUT | PUSH |
1) Always use new batteries when replacing the old set.
2)Do not attempt to charge,
operating.
4)Do not drop, apply shock or step on the remote control 5)Do not spill water on the remote control
6)Do not place objects between the remote control and remote sensor. 7)Do not use remote controls for other equipments at the same time.
8)If the MONITOR does not operate even when operating the remote control from a close range, it is time to replace the batteries (use
4