Listening to a program
When the main unit is working, it will automatically transmit the audio signal, and then you can use the infrared headphone to listen to a program.
1.Set the volume control of the headphone to minimum then switch on the headphone. And then put on it. The length of the headphone’s band can be adjusted to your need.
2.Adjust the volume.
Slowly increase volume level. After each use, be sure to switch off the headphone to extend battery life.
ATTENTION!
Listening over headphone at high audio levels can cause hearing impairments! Also, switching on or off the headphone can cause loud clicks and pops that can impair your hearing! Therefore, always set the volume control minimum.
11
