Panel keystoke instruction
Panel keystoke sketch map
• | Power key | • | Menu,direction Key |
| It can open or close the projector | It can adjust the menu by | |
|
| ||
| its function same as the "power" | UP/Down ,left/righ | |
| in the remote control | ||
|
|
| |
|
| • | Indicator light |
| PC/AV Key |
|
|
It can choose the input signal
(such as: AV.SVIDEO .Component video , HDMI,PC or TV)
If the projector is the new one 
please read 
projector install 
chapter 
placed the projector 
connect the powerwire and the signelwire 
the operation as follow:
Open operation
1.Before use the remoter .
Put in two 7 size battery in it
2. Open the power switch on the backboard 
the power light begin to flash 
press the power key on the remote control or panel 
the indicator light turn light 
After 2 second 
the projector lamp begin work 
began appear unclear white light on the screen 
after 2 minute,the projector begin work 
5. | For | the new projector. When the frist time to use maybe will appear image | ||
unclear | or | trapezoid distortion please read image adjustment chapter | ||
6. | After | the image is clear then you can watch program | during watching | |
| you also can setup the system parameter please read | menu setting chapter | ||
Close operation
1.During use the projector 
press 
power 
key 
can let the projector switch to stay situation 
2.After inter into stay situation 
the projector under auto protect
auto release hot 
the indicator light is flase situation
but here 
the projector is under auto protect situation 
not accept any order 
if need to startup again 
must wait for finished the release hot .
