OPERATING PROCEDURES
REMOTE SYSTEM
EQ TAPE TUNER CD
TAPEEQ
PHONO CD AV1 AV2 TUNER PLAY REC PLAY REC
LL
RR
AUDIO
L
_
RIGHT LEFT
_
SP EAK ER S6 ~8 Ω
INTEGRATED CIRCUIT AC 220V - 230V ~50Hz
Before starting operation
Check that the controls have been set to the following positions before commencing operation
Rotate the VOLUME control counterclockwise as far as it will go and set it at the “0” minimum volume position.
Set the BASS and TREBLE tone controls to the “0” (center) position.
After these checks, press the POWER switch to turn on the power.
If you find a remote standby indicator is lighted, the power amplifier is in remote standby state.
(a)Press the power switch off and press it once again after the remote standby indicator is off.
(b)Using the remote control to switch on the power.
Playing a program source
1.Press the desired input selector switch to select the program source which you wish to listen to.
To listen to record: press the PHONO switch.
To listen to radio broadcast: Press the TUNER switch.
To listen to a compact disc: Press the CD switch. To listen to a component connected to VIDEO terminals: Press the AV1/AV2 switch.
To listen to a tape: Press the TAPE switch.
2.Operate the program source unit.
3.Gradually turn the VOLUME control clockwise until the desired volume level is obtained.
4.To adjust the tone quality, adjust the BASS and TREBLE control.
* When you wish to use headphones, insert the plug of the headphones into the PHONES jack.
RECORDING TAPE
A record, compact disc, broadcast of the program source of a component connected to the line terminals can be recorded by the tape deck connected to the TAPE recording (REC) terminals.
1.Select the input selector switch corresponds to the program source PHONO, CD, TUNER, AV1/AV2 which is to be recorded.
2.Start playing the program source.
3.Operate the tape deck and press the “REC” key.
*The volume, Tone and other controls (including graphic equalizer) have no effect on the recording level or sound quality of the signals being recorded even they are operated.
