PYLE Audio PT-600A manual Speaker systems, Phono, Tuner, Connections

CONNECTIONS

Speaker systems

Connect the speaker systems to the SPEAKERS terminals on the rear panel of the unit with the speaker cords.

When viewed from the front (the listening position), the speaker mounted on the left should be connected to the L terminals, and the speaker mounted on the right should be connected to the R terminals. Be sure to connect the polarities of the speaker systems and the SPEAKER terminals correctly (+ to +, - to -). If the polarity of one of the speaker systems is connected improperly, sound in the central area between the speakers will appear to be missing, and the position of the instruments will not be clear, resulting in a loss of stereo directionality; so take care when connecting.

*When connecting, do not allow the conductor of the speaker cords to be exposed from the terminals and come into contact with other terminals.

RIG HT LE FT

L

__

SPEAKERS6~8 Ω

Front Left Front Right

PHONO

Connect the turntable’s output cord L (white) plug to the L PHONO terminal and the R (red) plug to the R terminal.

If your turntable is equipped with a grounding cable, connect it to the unit’s GND terminal. But disconnect it if you notice increased hum.

				TAPE		EQ
PHO NO CD	AV 1	AV 2	TUNER PLAY	REC	PLAY	REC
L						L
R						R
AUDIO

Tuner

Connect the TUNER terminals to the OUTPUT terminals on the tuner using the pin-plug cord.

			TA PE		EQ
PHO NO C D	AV 1	AV 2 TUNER PLAY	REC	PLAY	REC	OUTPUT
L						L
R						R
AUDIO