SPECIFICATIONS
Power output | Signal to noise ratio |
Min. RMS, both channels driven, from | PHONO……………….60dB |
than 0.1% total harmonic distortion. | TUNER, TAPE PLAY….70 dB |
50 watts per channel into 6 ohms. | Power requirements |
Load Impedance…………………..6 ohms | Power voltage…….220V ~ 50Hz |
Total Harmonic Distortion………less than 0.05% at 1/2 rated | For U.K………240V ~ 50Hz |
RMS power output. | For U.S.A & Canada…..110V ~ 60 Hz |
Frequency response (at 1 watt)…..20 to 20 kHz, + 1 dB, | Power consumption……300 Watts maximum |
RIAA curve deviation (PHONO 20 Hz to 20 kHz) | Dimensions………..420 x 135 x 230mm (W x H x D) |
…………….………………………+0.5 dB, | Weight………………6.2 Kg |
Input sensitivity and impedance (at 1 kHz for rated power |
|
output) PHONO……………..2.5mV/47 kohms | Design and specifications for subject to changes without |
(Max. input capability: mV at 1 kHz, less than 0.1% total | notice for improvements. |
harmonic distortion) |
|
TUNER, TAPE PLAY………..250 mV/47 kohms |
|
Output level (1 kHz) |
|
TAPE REC……………………250 mV into 47kohms |
|
