PROGRAM FUNCTION IN CD/MP3/USB MODE:
This feature allows you to program of the CD 20 tracks and MP3/USB 99 tracks on a disc for playback in any desired order.
In CD/MP3/USB stop model: Press the PROGRAM button to enter the program mode. The program number briefly shows '0 0 1', and the program indicator lamp flash. Press the SKIP FWD or SKIP REV button on the unit front panel or UP/FF or DN/FB button on the remote control to select the first track number you wish to enter in the program memory, example: Track number'008'. When the desired track number appears on the display, press the PROGRAM button again to memorize the track. The program number briefly shows '0 0 2', then program indicator lamp will shows and flashes.
Repeat step of the above, select a different track number each time until you have entered up to CD 20 tracks and MP3/USB 99 tracks in the program memory.
Press the PLAY/PAUSE button to begin programmed playback. The PROGRAM indicator lamp stop flashing. P layback will begin with the first track you have programmed and will continue until the last programmed track has been played.
The programmed sequence may be cancelled by press STOP button twice.
CASSETTE FUNCTION OPERATION:
1. Select to the CASSETTE function. Insert your cassette into the slot, as shown in the illustration, with the side you wish to play facing up and the open end on the right side.
2.Cassette playback begins as soon as the tape is inserted. Adjust the OFF- VOLUME control knob to the desired level.
3.To advance the tape rapidly, depress the EJ/FF (Eject/Fast
Forward)button approximately half way. The tape will move forward rapidly as long as the button is depressed. Normal playback will resume when the button is released.
4.When the tape ends the player stops automatically. Depress the EJ/FF (Eject/Fast Forward) button completely to remove the cassette from the
player. You may press the EJ/FF (Eject/Fast Forward) button to stop play and remove the cassette at any time.
5.To turn the system off, rotate the
7
