NOTE:
Level hold PLAY/PAUSE button to enter function change as follows:
When the CD function model has not put in CD/MP3 disc, inserts USB card, will automatic
switching to USB card the playback. To confirm recording successful or not, select the CD
function and level hold PLAY/PAUSE button to enter into USB function, insert USB card the
unit will read the USB songs.
CD/MP3 FUNCTION OPERATION:
Select to the CD function. press the OPEN/CLOSE button to open the CD door and the unit
LCD displays <OP>.
1.Place your CD or MP3 disc in the drawer with the printed label side facing up.
2.Press the OPEN/CLOSE button once more to close the CD door and the unit LCD display
<CLO>. the disc will spin for a few seconds while the player reads the disc and will
automatism playback.
PLAY CONTROL IN CD/MP3/USB MODEL:
1.Place your CD or MP3 disc in the drawer or insert USB card. Will automatism playback. Play will continue until the end of the DISC or USB card. When the disc ends, the display again shows the total number of tracks on the disc or USB card. You may also stop playback at any time by press the STOP button.
2.Adjust the OFF/VOLUME control to the desired level.
3.In play model: Press the SKIP FWD button on the unit front panel or UP/FF button on the remote control to begin the next song.
4.Press the SKIP REV button on the unit front panel or DN/FB button on the remote control to begin the previous song that has just been played.
5. Press the FOLDER +10 or FOLDER
CD/MP3/USB MODEL.
SELECTING THE FOLDER PLAYBACK FOR MP3/USB:
In stop model: Press FOLDER +10 or FOLDER
FOLDER- to confirm the FOLDER tracks number. Press PLAY/PAUSE button to playback.
The song number and folder number of your selected track will be shown consecutively in
every 2 seconds. Your may also stop playback at any time by press the STOP button.
5
