PYLE Audio PWLB003 manual Step Installing wall mount, Choose fitting position on the wall

Parts:
1				No	Qty	Name
				1	1	LCD panel
				2	1	Wall mount
				A	4	M4x8 bolt
2				B	4	M4x12 bolt
				C	4	M5x8 bolt
				D	4	M5x12 bolt
				E	4	M5 washer
				F	2	Long bolt
				G	2	Wall anchor
A	B	C	D	E	F	G

Step 1:

Step2: Installing wall mount

Installing ways of batten wall.

Use a electronic detector in lay position to detect the position of batten, then making a mark. Put the wall mount in the installing position flatly, using it as template, lining out a hole in the center of batten. Using a aiguille of dia.3mm to drill two 50mm deep holes. U s i n g l o n g b o l t t o install wall mount carefully.

Installing ways of cement and beton wall

Put the wall mount flatly in the installing position, using it as template, lining out the hole on the wall. Use a aiguille of dia.8mm to drill a 50mm hole, embedding the wall anchor to hole, and knocking it into wall lightly.

Carefully: wall anchor is just fit for cement and beton wall. Don't use wall anchor in drywall to install bracket.。

	Step 3: Installing LCD
A-D	According LCD hole's size, deep, position
	to choose bolt. Using M5 washer and
	chose bolts to install the LCD on the
	panel. Showing as Fig 2.
	Carefully: Don't force the b o l t to LCD
	hole, avoiding d a m a g e t o p e o p l e a n d

Choose fitting position on the wall.

Important: Make sure there is enough space to spread LCD, considering show size.

This product offers two installing parts: wooden wall and cement wall.

F

G

Fig 1

E	instrument. Don't use electronics drill
Fig2
	to fasten screw.
Step 4: Button the LCD to wall

F i r s t l y p u t u p t h e p a n e l a n d T V, m a k i n g t h e s m a l l t r o u g h o n t h e

p a n e l f i t t o t h e b i g t r o u g h o n t h e w a l l m o u n t , a c c o rd i n g t ro u g h to embed the LCD panel into the wall mount, As shown in Fig 3.

Warning: It needs 2 people to put up some TV! Our company will not responsible for any damage by man-made.

-2- -3-