Using the “Punch”

Controls (PYD-720)

This featured control lets you smoothly and quickly turn a playing source on and off, or switch between the two different input sources assigned to Crossfade Channel A and B.

The effect you get depends upon the position of the Crossfader.

With the Crossfader at 100% Channel A (all

 

the way to the left), pressing the Channel A

Punch Control

Punch Button will mute the Channel A material.

Similarly, with the Crossfader at 100% Channel

B (all the way to the right), pressing the

Channel B Punch Button will mute the Channel

B material.

With the Crossfader in the middle position, press the Channel A punch button and the Channel A material will be subtracted from the mix, leaving only Channel B material. Likewise, press the Channel B punch button and the Channel B material will be subtracted from the mix.

Troubleshooting

Your mixer should require very little maintenance. If you have problems, refer to the chart below for possible solutions. If you cannot solve the problem, contact a qualified technician for assistance.

 

PROBLEM

POSSIBLE SOLUTION

 

 

Nothing works

• Check the AC connection. Make sure the AC outlet is “live.”

 

 

 

• Check the power connection to the rest of the system

 

 

 

(receiver/amplifier, etc.)

 

 

 

 

 

 

No signal from an

• Check the control setting

 

 

audio input

 

 

• Check the connection between the mixer and the input source

 

 

source

 

 

 

 

 

Hum from PHONO

• Check that the turntable’s ground wire (usually black or green) is

 

 

fastened securely to the GROUND SCREW on the mixer input

 

 

 

 

 

 

panel

 

 

 

 

 

 

Hum from other

• Make sure there are no low level inputs connected to the LINE

 

 

source

input jacks

 

 

 

 

 

 

Feedback is

• Move the microphone further away from the output speakers,

 

 

present

or use a directional microphone

 

 

 

 

 

 

 

 

 

Care and Maintenance

Your Pyle Pro Mixer is an example of superior design and craftsmanship. The following suggestions will help you care for your mixer so you can enjoy years of use:

•Keep the mixer dry. If it gets wet, wipe immediately.

•Use the mixer only in well-ventilated installations.

•Handle the mixer gently and carefully - do not drop!

•Keep the mixer away from dust and dirt.

•Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemicals, solvents or detergents!

Specifications

PYD710/720

Input Sensitivity/Impedance

Mic

1.5 mV/600 Ohms

Phono 1-2

3.0 mV/50K Ohms

Line 1-4

150.0 mV/27K Ohms

 

 

Output Level

 

Main Out

2.0 V/10-kOhms

Record

 

120mV/10-kOhms

 

 

Frequency Response

20Hz – 20kHz +/- 3 dB

 

 

S/N Ratio (at 1 kHz)

 

Mic

55 dB/1.5mV input

Phono

65 dB/3.0mV input

Line

70 dB/150.0 mV input

Limited Warranty

All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for two (2) years from the date of purchase. This warranty is limited to the original retail purchaser of the mixer.

Should the unit fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of PYLE.

To obtain warranty service, you must first call our Consumer Return Hotline at (718) 236-6948 to obtain a Return Authorization Number. This R.A. # must appear on the outside of your package and on all paperwork relating to your return.

When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to:

R.A.#: _____________

PYLE PRO Service Center

1600 63rd Street

Brooklyn, NY 11204

You must also include the following items with your return:

•A copy of your sales receipt or other proof of purchase

•A brief letter, indicating the problem you are experiencing with the product

•Include in your letter your return address, daytime phone number and R.A. number

•Also include a check or money order for $15.00 for return shipping, handling and insurance, or provide your Visa/MC number with expiration date.

Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage.

Distortion

 

 

 

Mic

0.50%

 

 

Phono

0.08%

 

 

Line

0.05%

 

 

 

 

 

 

Tone Control

 

 

 

Treble

10kHz;

+/-10dB

Bass

100Hz;

+/-10dB

 

 

 

 

Talkover Attenuation

-16dB

 

 

 

 

Power Source

120 VAC, 60Hz/230 VAC, 50 Hz

 

 

 

 

Dimensions, inches

Model PYD-170:

(mm)

7.5 x 3.4 x 8.7

 

(190 x 86 x 220)

 

 

 

 

Model PYD-720:

 

8.7 x 3.4 x 10.0

 

(220 x 86 x 254)

 

 

 

Weight, lbs (kg)

Model PYD-710/PYD-720

4.4 (2.0)/5.5 (2.5)

 

Here

Stamp

Place

complete warranty card, detach and return

 

 

 

 

 

 

 

PYLE PRO Audio, Inc. 1600 63rd Street Brooklyn, NY 11204

 

 

 

 

 

 

 

 

 

 

Please

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8 – Pyle Pro Mixer Owner’s Manual

Pyle Pro Mixer Owner’s Manual – 9