Your PYLE PRO Series Performance Mixer
is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.
Features and Controls: PYD1100 Mixer
Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect years of
Owner’s Manual Table of Contents
MIC 1 Combo Input Jack For connecting a balanced or unbalanced low impedance microphone with XLR- type or 1/4” plug
Channel Input Selector Lets you choose the input source to play for each channel
Channel CUE Switch Allows you to monitor the selected audio input source and prepare it prior to mixing it in.
i Input/Output Features
1 Features and Controls: PYD 1100
2 Presetting Controls Before Use Connecting the Mixer Inputs
4 Connecting the Mixer’s Outputs to Amplifiers
to Recorders
to Booth Speakers 5 Using Headphones
6 Using the Mixer Controls
Turning On the Mixer
Monitoring (”Cueing”) Inputs
Mixing Inputs
7 Adding Equalization to the Mix Using the MicrophoneTalkover Mode Microphone Tone and Level Controls Using the Crossfader
8 Troubleshooting
Care and Maintenance
9 Specifications
Warranty
Dual VU Meter Indicates the levels of Left and Right Master Channels
Master Level Control Lets you control mixer’s overall volume level
Booth Level Control Lets you control the mixer’s overall BOOTH volume level, if you set up remote speakers or DJ booth monitors
Input/Output Features:
Stereo Line Inputs let you connect most
|
|
| VOLTAGE | OUTPUT |
|
|
|
|
|
|
|
|
| INPUT |
|
|
|
|
|
|
|
|
| |
| ~AC INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FUSE | F 500mA | 250V | Master | Booth | Rec |
|
| CH 4 |
|
|
| CH 3 |
|
|
|
|
| CH 2 |
|
|
|
| CH 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| L |
| L | L |
|
|
|
|
|
|
| L | L |
|
|
|
| L |
|
| L | GND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MIC 2 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| R |
| R | R |
|
|
|
|
|
|
| R | R |
|
|
|
| R |
|
| R |
|
|
|
|
|
|
| Line | 7 | Line | 6 | Line | 5 | Phono | 2 | LN 4 | PH 2 | Line | 3 | Phono | 1 | LN 2 | PH 1 | Line | 1 |
|
|
|
|
|
|
|
|
|
|
|
|
| /Line | 4 |
|
|
|
| /Line | 2 |
|
|
|
|
|
MIC Talkover Allows you to lower the level of the input sources so you can talk them using the DJ Mic
MIC1 Tone Controls
MIC1 Level Controls Lets you control the MIC levels as they enter the mix
Headphone Level Control
Headphone Jack
Accepts headphones with 1/4” plug
Headphone CUE/PGMControl Allows you to listen simultaneously or separately to the CUE material or the active program
Crossfader Slider Control Allows you to smoothly switch between the input sources to Channel 2 and Channel 3
Channel Level Slider Control
Output Jacks to connect the mixer to a receiver or amplifier
Booth Output Jacks to connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location
Record Output Jacks to connect the mixer to a tape deck for recording the mixed program
Dual Purpose Stereo Inputs for | Ground Screw | |
using a turntable with a magnetic | for turntables | |
cartridge OR a high level input |
| |
source |
|
|
Input Select Switches – set these | MIC2 Microphone | |
switches based on what is plugged | connector permits | |
into Phono1/Line2 and Phono2/Line4 | you to connect a | |
input jacks | balanced or | |
| unbalanced low | |
| impedance microphone | |
| with 1/4” plug. | |
i – Pyle Pro Mixer Owner’s Manual | Pyle Pro Mixer Owner’s Manual – 1 |
