Using the Mono/Stereo Mode Switch

When the MASTER MONO/STEREO switch is in the MONO position, the mixer combines the right and left channels and sends them to the OUTPUT R and L jacks. These combined outputs can be used by a monoaural amplifier, such as a PA amp.

In the STEREO position, right and left channels remain separate. The mixer outputs can be used by a stereo amplifier or recorder.

The ZONE MONO/STEREO switch works similarly, except that its setting affects the ZONE R & L Outs.

Using the Crossfader with the Assign Switches

For crossfading effects, you can assign any of the four channels to either A or B sides of the crossfade mix using the Crossfade assign knobs.

When the crossfade slider is in the center position, the two assigned channels play equally. Sliding the control towards the A position will increase the level of A and fade out B proportionally to the distance from center. Likewise, sliding the control towards the B position will increase the level of B and fade out A.

Using the Digital Sampler (PYD-1955)

The PYD-1950 mixer contains a digital sampler circuit which can record 5 different samples to the internal recording IC. These samples can then be assigned to CH 1, CH 2, CH 3, CH 4 and the MIC channel for playback. At the time of playback, the SPEED control can be adjusted to change the pitch of the sample.

Follow these steps to record a sample:

1.Play the audio source for recording as a sample.

2.While it is playing, press the desired cue/sample channel assign button (i.e., CH 1, CH 2, CH 3, CH 4 or MIC).

3.To record the source to that channel, set the SAMPLER MODE switch to the RECORD position and press the START/STOP button to begin recording. The LED will go on, indicating recording is in progress. To stop recording, press the START/STOP button again. Please note that the recording IC is limited to 12-second samples, so in the event you do not press stop, it will automatically stop after 12 seconds

4.To playback the recorded sample ONCE, turn the SAMPLER MODE switch to SINGLE, and press START/STOP. The LED will go on, indicating that a sample is playing. Pressing START/STOP during playback will stop the playback.

Each time you press the START/STOP control, the unit will replay the recorded sample from the beginning and play it through the end of the recorded sound. Rapid, consecutive pressing of the START/STOP button will create an interesting stuttering effect.

5. To playback the record sample repeatedly (”looping”), set the SAMPLER MODE switch to REPEAT, and press START/STOP. The mixer will play the sampled recording all the way through, and thenrepeat it until you press the START/STOP button.

6. To adjust the speed of the playback signal, rotate the SAMPLE PITCH control to reduce or increase the pitch of the sample during playback.

7. To adjust the level of the sample playback as it enters the mix, rotate the SAMPLE LEVEL to increase or decrease the level.

Pyle Pro Mixer PYD1911/1955 Owner’s Manual – 11

Page 13
Image 13
PYLE Audio PYD1955 manual Using the Mono/Stereo Mode Switch, Using the Crossfader with the Assign Switches

PYD1955 specifications

PYLE Audio PYD1955 is a powerful and versatile car amplifier that is designed to enhance the audio experience in vehicles. This amplifier provides drivers and passengers with high-quality sound reproduction, making it an excellent choice for those who want to elevate their in-car audio system.

One of the standout features of the PYLE PYD1955 is its impressive power output. It delivers an RMS power of 1000 watts, allowing it to drive multiple speakers or subwoofers with ease. The peak power rating can reach up to 2000 watts, which provides ample headroom for loud and dynamic sound performance. This makes the PYD1955 a suitable choice for music enthusiasts who enjoy high-volume playback without compromising audio quality.

The amplifier is built with a compact design, making it easy to fit into various car models without taking up too much space. Additionally, its durable construction ensures longevity and reliability, even in challenging conditions that can be encountered in automotive environments.

Another notable feature of the PYLE PYD1955 is its built-in crossover system. This technology allows users to customize the sound output by filtering frequencies to ensure that each speaker receives the appropriate signals. Users can easily adjust the low-pass filter and high-pass filter settings to achieve the desired balance between bass and treble, enhancing the overall sound quality.

The amplifier also includes RCA inputs and speaker terminals for straightforward connectivity to existing audio systems. With an efficiency rating that minimizes power loss, the PYD1955 is an energy-efficient choice that does not compromise performance, allowing users to enjoy extended listening sessions without draining their vehicle’s battery.

In addition to its quality performance and user-friendly design, the PYLE PYD1955 comes with built-in protection circuitry. This feature guards against overheating, short circuits, and other potential issues, ensuring safe operation and preventing damage to the amplifier and connected components.

Overall, the PYLE Audio PYD1955 car amplifier is a powerful, efficient, and feature-rich solution for enhancing in-car audio systems. With its high power output, customizable crossover settings, and safety features, it is tailored to meet the needs of audiophiles seeking an immersive sound experience on the road. Whether driving to work or embarking on a road trip, the PYD1955 ensures that every journey is accompanied by high-fidelity sound.