01 INSTALLATION
04 RADIO & CD OPERATIONS
PRECAUTIONS
Choose the mounting location where the unit will not interfere with the normal driving function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop. Like an emergency stop.
If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.
30
Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, form the heater, or where it would be subject to dust, dirt or excessive vibration.
DIN |
| |
Installing the unit | 2 | |
|
| 1 |
1. | Dashboard |
|
2. | Holder |
|
| After inserting the holder into the | 3 |
| dashboard, select the appropriate tab | |
| according to the thickness of the |
|
| dashboard material and bend them |
|
| inwards to secure the holder in place. |
|
3. | Screw | (Fig. 1) |
|
| |
RADIO OPERATIONS
BAND
Press BND button (10) to change bands as below:
FM 
AM
SELECT STATION
Rotate TUNING knob (11) clockwise or anticlockwise to adjust the frequency upward or downward.
CD OPERATIONS
DISC PLAY
Gently insert a CD with the label side facing up into the Disc Slot (16). The CD is then automatically loaded into the unit and starts playing with the first track of the disc. The digital display will indicate the track number and the time of the track.
EJECT
Press Eject button (15) to stop CD playback and eject CD from slot. Receiver switches to radio operation.
PAUSE CD
Press Play/Pause button (14) to temporarily stop the playback. Press it again to resume playback.
SKIP TRACKS
Press Track Forward button (17) or Track Reverse button (18) to choose the following track or the previous track. Track numbers show on display.
LOCAL/DISTANT
Press the LOC/RPT button (12) to select between local setting for reception of strong station and distant setting for reception of weak station when tuning.
MONO/STEREO
In FM band, press MON/INT button (13) to select mono or stereo reception for radio stations. You can sometimes improve reception of distant stations by selecting mono operation.
FAST FORWARD/FAST REVERSE Hold Track Forward button (17) or Track Reverse button (18) for several seconds to fast forward or fast reverse. Releasing the button to stop fast forward and fast reverse playback.
REPEAT
Press LOC/RPT button (12) to continuously repeat playing the current track. Press it again to cancel the function.
INTRO:
PREVIEW ALL TRACKS
Press MON/INT button (13) to play first several seconds for each track. Press it again to stop intro and back to normal playback.
RANDOM:
RANDOM TRACKS PLAYBACK
Press and hold LOU/RDM button (8) for several seconds to play all tracks in the random order. Press it again to cancel the function.
Page 02 | Page 07 |
