Q-Logic 4400 Base Configuration and Power Pack, Additional Options, Configuration Information

QuickSpecs

HP StorageWorks EVA iSCSI Connectivity Option

Configuration Information

Step 1 - Base Configuration and Power Pack

Select one:
Model	Model Description	Part Number
StorageWorks EVA iSCSI	Includes 1 unit, shelf, brackets, 2 copper FC cables (for direct connect to EVA) and	AE324A
Connectivity Option	documentation
(mpx100)	NOTE: Fabric iSCSI-Fibre Channel attachment mode requires optical transceivers and
	cables listed below.
StorageWorks EVA iSCSI	Includes 1 unit to mount in existing shelf and documentation	AE325A
Connectivity Upgrade	NOTE: For multi-path (dual unit) support order both part numbers.
(mpx100)	NOTE: For a highly redundant direct connect environment, recommend customer
	purchase 2 additional FC copper cables listed below (see the HP StorageWorks EVA
	iSCSI connectivity user guide).
StorageWorks EVA 4400	Includes 1 unit, shelf, brackets, copper FC cables (for direct connect to EVA) and	AJ713A
iSCSI Connectivity Option	documentation. For use with EVA 4400 only.
(mpx100b)	NOTE: Fabric iSCSI-Fibre Channel attachment mode requires optical transceivers and
	cables listed below.
StorageWorks EVA 4400	Includes 1 unit to mount in existing shelf and documentation. For use with EVA 4400	AJ714A
iSCSI Connectivity	only.
Upgrade (mpx100b)	NOTE: For multi-path (dual unit) support order both part numbers.
	NOTE: For a highly redundant direct connect environment, recommend customer
	purchase 2 additional FC copper cables listed below (see the HP StorageWorks EVA
	iSCSI connectivity user guide).

StorageWorks EVA 4400 iSCSI Connectivity Option 32 Initiator Upgrade LTU (for mpx100b only)

Includes 1 license upgrade to enable connectivity for an additional 32 iSCSI initiators. T5471A

If a second license is installed, it provides an upgrade to the maximum supported number of iSCSI initiators. Refer to the guidelines described in the EVA iSCSI Connectivity User Guide available on the Storage Networking product page and the HP StorageWorks SAN Design Reference Guide available at: http://www.hp.com/go/sandesignguide.

Step 2 - Additional Options

Optical Transceivers	Short Wave - 300m	A7446B
EVA Loopback Connector	The loopback connector is used when an EVA host port is not cabled to a switch,	AJ706A
	mpx100/100b (for iSCSI direct connect), or HBA (for FC direct connect).
	NOTE: All EVA host ports must be filled with either a cable or loopback connector.

DA - 12413 Worldwide — Version 10 — June 19, 2009 Page 7