Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 8C manual Switch Dimensions, Switch Electrical, Switch Environmental

Models: 8C

1 162

Download 162 pages 4.03 Kb

Page 71

			A – Specifications
			Switch Dimensions

A.4

Switch Dimensions
Width		8.5”
Height		1.70”
Depth		20.0”
Weight		8.5 lbs.
A.5
Switch Electrical
Operating voltage		90 to 137 Vac; 47 to 63 Hz
		180 to 264 Vac; 47 to 63 Hz
Power source loading		1.0 Amps maximum at 90 to 137 Vac
		0.45 Amps maximum at 180 to 264 Vac
Heat Output (maximum)		70 watts
Circuit Protection		Internally fused
A.6
Switch Environmental
Temperature
■	Operating	5 to 50°C (41 to 122°F)
■	Non-operating	-40 to 65°C (-40 to 149°F)
Humidity
■	Operating	15% to 80%, non-condensing
■	Non-operating	25% to 90%, non-condensing
Altitude
■	Operating	0 to 3048m (0 to 10,000 feet)
■	Non-operating	0 to 15,240m (0 to 50,000 feet)
Vibration		IEC 68-2
■	Operating	5-500 Hz, random, 0.21 G rms, 10 minutes
■	Non-operating	5-500 Hz, random, 2.09 G rms, 10 minutes
Shock		IEC 68-2
■	Operating	4 g, 11ms, 20 repetitions
■	Non-operating	30g, 292 ips, 3 repetitions, 3 axis
Air flow		Front-to-back or back-to-front, by model

59042-01 A

A-3

Image 71

Q-Logic 8C manual Switch Dimensions, Switch Electrical, Switch Environmental, Width Height Depth 20.0 Weight Lbs

Contents

SANbox2-8c Fibre Channel Switch Installation Guide Document Revision History SANbox2-8c Fibre Channel Switch Installation GuideTable of Contents Section Planning Section InstallationSection Diagnostics/Troubleshooting Appendix B Command Line Interface Appendix a SpecificationsTables Glossary IndexSet Config Threshold Parameters Intended Audience IntroductionRelated Materials Sicherheitshinweise Safety NoticesFederal Communications Commission FCC Class a Statement Communications StatementsIEC1000-4-51995 Surge Immunity Test EN60825-1/A111996 Safety of Laser Products, PartCE Statement Bsmi Class a Statement Vcci Class a StatementPiè ces Accessibles Laser Safety InformationElectrostatic Discharge Sensitivity Esds Precautions Accessible PartsContact Information Technical SupportAvailability TrainingGeneral Description Chassis Controls and LEDs Reset/Force Prom ButtonFan Fail LED Yellow Resetting a SwitchPlacing the Switch in Force Prom Mode Over Temperature LED YellowFibre Channel Ports Input Power LED GreenHeartbeat LED Yellow Activity LED Small Form-Factor Pluggable SFP TransceiversLogged-In LED Fabric Ports Port ModesExpansion Port Translated Loop PortEthernet Port Ethernet PortSerial Port Pin Identification Serial PortSwitch Management Power Supply and FanDevices PlanningDomain ID, Principal Priority, and Domain ID Lock Multiple Chassis FabricsCascade Topology Common TopologiesMesh Topology Mesh TopologyMultistage Topology Multistage TopologyDistance PerformancePort-to-Port Latency BandwidthLatency Port-to-Port Transmission CombinationsDevice Access Soft Zones Access Control List Hard ZonesFabric Management Virtual Private Fabric Hard ZonesFabric Security Planning Fabric Security 59042-01 a Management Workstation Requirements Switch Power RequirementsSite Requirements Fabric Management WorkstationEnvironmental Conditions Installing a SwitchA-3 Mount the SwitchSFP Transceiver Installation Install SFP TransceiversAvertissement Connect the Switch to AC PowerWarnung Ethernet and Serial Cable Connections Connect the Management Workstation to the SwitchSerial Connection Ethernet ConnectionEnter the following command at the Solaris prompt Install SANbox ManagerSANbox Manager Installation for Windows Press the Enter key Enter the following command SANbox Manager Installation for LinuxSANbox Manager Installation for Solaris Configure the Switch Installing Firmware Configure the PortsCable Devices to the Switch Using the CLI to Install Firmware Using SANbox Manager to Install FirmwareEnter the following command to install the new firmware Using FTP and the CLI to Install FirmwarePowering Down a Switch Installation Powering Down a Switch 59042-01 a Normal all pass Post DiagnosticsHeartbeat LED Blink Patterns Internal Firmware Failure Blink Pattern Force Prom Mode PatternFatal Error Blink Pattern Configuration File System Error Blink PatternEnter the following account name and password userimages Restore the configuration file Logged-In LED Indications Logging ErrorIsolation Cause Remedy EPort Isolation Causes and RemediesOver Temperature LED is Illuminated Chassis DiagnosticsFan Fail LED is Illuminated Input Power LED Is ExtinguishedRecovering a Switch Force Prom Image Unpack Force Prom Reset Network ConfigForce Prom Exit Force Prom Copy Log Files Force Prom Reset Password FileForce Prom Remove Switch Config Force Prom Reset SwitchDiagnostics/Troubleshooting Recovering a Switch 59042-01 a Switch Specifications FTP Switch MaintainabilityWidth Height Depth 20.0 Weight Lbs Switch DimensionsSwitch Electrical Switch EnvironmentalShortwave Laser SFP 1G/2G multi-mode Switch Regulatory CertificationsLongwave Laser SFP 1G/2G single-mode Page Logging On to a Switch Command Line InterfaceCommand keyword keyword value Command SyntaxCommand syntax is as follows Table B-1. Commands Listed by Authority Level CommandsKeywords Admin CommandAuthority SyntaxAuthority Admin Syntax alias Alias CommandRename aliasold aliasnew Members aliasRemove alias members Edit config Config CommandSyntax config Keywords activate configSave config RestoreKeywords MMDDhhmmCCYY Date CommandSyntax date Currently active version Fallback CommandFollowing is an example of the Fallback command FallbackKeyword Help CommandHelp command keyword CommandHistory History CommandUser Unpack file Image CommandAuthority Admin Syntax image cleanup Keywords cleanupPortnumber Lip CommandLip portnumber Accountname Passwd CommandPasswd accountname Displays current system process information Ps CommandExamples The following is an example of the Ps command Authority User Syntax psSyntax quit, exit, or logout Quit CommandAuthority User Closes the Telnet sessionKeywords config configname Reset CommandAuthority Admin Syntax reset Table B-3. Port Configuration Defaults Table B-2. Switch Configuration DefaultsTable B-4. Alarm Threshold Configuration Defaults Table B-5. Snmp Configuration Defaults Table B-6. System Configuration Defaults Syntax set Set CommandPort option Setup optionSwitch state Port portnumber Set Config CommandSet config Table B-7. Set Config Port ParametersCommand Line Interface Set Config Command Table B-8. Set Config Switch Parameters Threshold Table B-9. Set Config Threshold ParametersTable B-10. Set Config Zoning Parameters Mfstov Following is an example of the Set Config Switch commandFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Clear Set Log CommandSet log ArchiveSave Level levelPort portlist Level keyword to Info at the same time Set Log Stop commandStop Stops logging of eventsAuthority Admin Set Port CommandSnmp System Set Setup CommandSet setup Table B-11. Snmp Configuration SettingsTable B-12. System Configuration Settings SANbox2 admin # set setup snmp Following is an example of the Set Setup System command Broadcast Show CommandAlarm Keywords aboutNs option Log optionTable B-13. Show Port Parameters Perf optionLIPF7F7 Support Post logSteering domainid Version TopologyUsers Following is an example of the Show Setup Snmp command Following is an example of the Show Topology command LIPF8F7 Following is an example of the Show Port commandFollowing is an example of the Show Switch command Show config Show Config CommandFollowing is an example of the Show Config Threshold command Following is an example of the Show Config Switch commandFollowing is an example of the Show Config Zoning command Keywords component Show Log CommandFollowing is an example of the Show Log command Following is an example of the Show Log Options commandShow Perf Command Press Mfg Show Setup CommandShow setup Following is an example of the Show Setup System command Syntax shutdown Shutdown CommandStatus Test CommandAuthority Admin Syntax test Keywords port portnumber testtypeChoose type of port loopback test to run Command Line Interface Authority User Syntax uptime Uptime CommandExamples The following is an example of the Uptime command Delete accountname User CommandAccounts AddFollowing is an example of the User List command Following is an example of the User Add commandFollowing is an example of the User Delete command Authority User Syntax whoami Whoami CommandExamples The following is an example of the Whoami command Copy zonesource zonedestination Zone CommandSyntax zone Keywords add zone membersRename zoneold zonenew Delete zoneMembers zone Remove zone membersFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset CommandZones zoneset Delete zonesetRemove zoneset zonelist Rename zonesetold zonesetnewFollowing is an example of the Zoneset Zones command Limits Zoning CommandEdit Opens a Zoning Edit sessionFollowing is an example of the Zoning List command Command Line Interface Command Line Interface Zoning Command 59042-01 a Fabric Management Switch BootPClass 2 Service Class 3 ServiceFrame Input Power LEDOver Temperature LED Power On Self Test PostZone Small Form-Factor Pluggable TransceiverTarget Worldwide Name WWNPage Index LED Priority 3-2 switch 3-2 processor Index-4 59042-01 a 59042-01 a Index-5