Q-Logic 2-Gb Fibre Channel to PCI-X Host Bust Adapter, FC2354601-00 A, SANblade 2300 Fibre Channel Problem Checklist

4 – Troubleshooting
Fibre Channel Problem Checklist
4-2 FC5051101-00 A

4.4
Fibre Channel Problem Checklist
■Were all of the FC devices powered up before you powered up the PC?
■Check that all cables are properly connected.
■Have you configured your RAID controller using the utilities provided by the
manufacturer?
■Some Fibre Channel switches support zoning. Make sure that your switch
is configured correctly.
■Make sure that Data Rate setting on the QLA23xx matches the target device.
For example, if the QLA23xx is set to 2Gb, set the target device to 2 Gb.
■If you are using a Raidbox, modify the following settings in Fast!UTIL:
❑Login Retry Count = 60
❑Port Down Retry Count = 60
❑Execution Throttle = 100