Q-See user manual Q-SeeQ25DVR4ES User’s Manual, Search Time

Q-See Q25DVR4ES User’s Manual

SEARCH TIME

		1		2
2008/01/08 08:30:56			┅ 2008/01/08 16:00:35
	01	TIME	2008/01/08	15:50:20
3	* 02	TIME	2008/01/08	14:30:56
	03	TIME	2008/01/08	14:15:30
			4
	* 04	TIME	2008/01/08	14:00:15
	* 05	MOTION	2008/01/08	13:55:37
5	06	MOTION	2008/01/08	11:30:12
	07	MOTION	2008/01/08	10:15:30
4	08	MOTION	2008/01/08	08:30:55

	(UP,DOWN) MOVE	(PLAY) PLAY		(MENU) EXIT
	(FF) SELECT MODE (SELECT) CHANGE
1.	Start Time.		2. End Time.
3. TIME: Continuous record.			4. MOTION: Motion Triggered event.
5.	Un-played video recording.

Chapter 8: USB DVR Access - 8.1 Program Installation

1.Put the USB Driver Program CD in your CD-ROM Drive.

2.Open CD directory.

3.Double click on “Set up”.

4.Run the install DVR Viewer program.

To Run the program Double click the program icon [ ] on the desktop.

DVR Viewer will detect the hard drive automatically when user connects the USB cable to PC.

NOTICE: If the hard drive isn’t detected, please restart and try the following:

1-Close the USB program window and remove the USB cable

2-Press [ ] then reconnect the USB cable to the PC and try again.

Page 18