Chapter 3: Installation - 3.1 Installing Hard Drive
NOTE: This package comes with a 250GB hard drive. You would follow these instructions if you want or need to install a new hard drive.
1.Slide the HDD tray out of DVR body carefully.
2.Connect the power cord and data cable to hard disk drive carefully.
3.Insert the HDD tray into DVR body.
4.Lock the HDD tray.
Make sure the HDD is set as MASTER.
CAUTION: Do not remove the cartridge while the DVR is on!
CAUTION: The wedge at the end of the cartridge handle must be fully inserted into the compartment; otherwise the cartridge will not be able to insert into the DVR firmly, it could also cause damage by scraping the body of the DVR.
Page 5
