Q-See QR4074-411 manual Part 3 DVR Controls Front Panel, Power

Q-SEE QUICK INSTALLATION GUIDE

MODEL NUMBER QR4074-411

PART 3 - DVR CONTROLS: FRONT PANEL

Device	Item	Button Name /	Function
	Number	Symbol
	1	POWER	On: The LCD screen is displayed in a basic activation status;
			Off: The LCD screen enters into sleep mode.
LCD	2	MENU	Press once to display LCD main menu. Press again to exit LCD main menu.
	3	+	Increase and confirm setting value
	4	-	Decrease and confirm setting value
	5	MENU	Press once to display DVR main menu. Press again to exit DVR main menu.
			When pressed while the Main Menu is not displayed, the down arrow button allows
			you to scroll through the video feeds transmitted from each camera hooked up to
	6		your system.
			When pressed while the Main Menu is displayed, the down arrow button allows you
			to navigate the Main Menu Interface and select the icon of the program you wish to
			access.
DVR			When pressed while the Main Menu is not displayed, the right arrow button allows
			you to scroll through the video feeds transmitted from each camera hooked up to
	7		your system.
			When pressed while the Main Menu is displayed, the right arrow button will allow
			you to navigate the Main Menu Interface and select the icon of the program you
			wish to access.
	8	ENTER	When pressed while the Main Menu is displayed, the ENTER button will allow you to
			enter into the sub-menu of the program you wish to access.
	9	REC.	When the “Red” Indicator Light Flashes, it Means the Hard Drive is Being Read or
			Written to
	10	PWR	If the “Green” Indicator Light is on, the System is Getting Power.
	11	IR Receiver	Receives Signal from Remote Control

3 P a g e