Q-See QSD9004, QSDR, QR user manual

f.Clicking on Network will generate a Network settings dialog box as illustrated in Figure 4. Click on the [DDNS SETUP] button to generate a DDNS setting dialog box as illustrated in Figure 5.

(Figure 4)

NOTICE: You need to put your public DNS. This can be found in your Router Status tab. Usually there are 2 DNS entries (DNS1 & DNS2). Use DNS 1 only. If you router does not list the DNS address get it from your Internet Service Provider.

g.Enter the User Name, Password and Domain Name that you registered for through http://myq-see.com. Click the [APPLY] button at the bottom of the screen and then the [EXIT] button. This should return you to the Network Setup menu.

h.Click the [APPLY] button and then the [EXIT] button at the bottom of the Network Setup Screen and your DDNS setup is complete.

(Figure 5)