Q-See QSTD501616C Setup, Manual Recording, Time Schedule Recording, Motion Detection Recording

2Setup

To navigate through the DVR menu, three options are available:

1.DVR Front Panel: Use the DIRECTION keys to move the cursor and the ENTER key to select

2.Remote Control

3.USB Mouse (included)

AAccessing the DVR menus

A1	Press the MENU key on the DVR front
	panel, which will display the LOGIN
	SCREEN (A1). Enter the default user
	name: admin, and password: 123456.This
	will display the SYSTEM SCREEN (A2).
	Use the direction keys to move the cursor
	and the ENTER key to select.

A2	The system screen offers the following
	setup features:

BASIC option: set time, date, enable audio and password check.

LIVE option: adjust the camera images

RECORD option: (B2) to set up resolution, frame rate, video quality and enable cameras for recording.

PTZ option: setup Pan-Tilt-Zoom cameras

USER option: setup users on the system

NETWORK option: setup remote access

TOOLS option: to access hard drive information, update firmware, and restore system defaults.

Refer to Chapter 3 of the user’s manual for more information on the SYSTEM menu.

BSetting up the DVR to Record: This system offers four modes for recording: 1) Manual, 2) Schedule, 3) Motion Detection, and 4) External Sensor.

For setup of external sensor alarms refer to sections 2.3.2 and 3.3.5 of the user’s manual.

B1 B2

Manual Recording:

Setup and enable the cameras you want to record by going to the System Menu and selecting the RECORD option (B1, Red Box) this will display the Record Screen (B2). Put check marks in the cameras you want to record, and set the quality and frame rate you prefer for each camera. Push the RECORD button on DVR to start recording. Push the stop button to stop recording.

B3 B4

Time Schedule Recording:

Go to the System Menu and select the SCHEDULE option (B3, Red Box). The SCHEDULE screen (B4) will appear. Put a check mark in the Schedule box (B4, Red Box). Select or de-select the Days and Hours you want the cameras to record. The Green area shows the hours that are enabled to record, and the transparent area shows the hours which are not enabled to record. Select OK to save the settings. Repeat this feature for all cameras.

Motion Detection Recording:

You must first setup the days and times for recording on motion detection, by going to the System Menu and selecting the SCHEDULE option (B3, Red Box). The Green area shows the hours that are enabled to record, and the transparent area shows the hours which are not enabled to record. Select the hours you wish to record. Put a check mark in the Motion Box (B4, Green Box).

Page 5 Page 6