UNPACKING
Unpacking and Inspection
The 215PCM is highly durable and is carefully packaged and crated. We recommend you inspect the unit carefully after removing it from the packaging, as occasionally there may be damage due to some unfortunate incident during shipment. Report any damage to the shipping carrier. We recommend saving the carton and packing material. It is always a good idea to keep the packaging in case the unit must be shipped back to your dealer, distributor, or service center. Also note: some freight companies consider damage claims without the original packing materials invalid.
When removing the loudspeaker from its packaging, grasp the unit using the integral handles on the sides. The transducers are deeply recessed and covered with a strong metal grill, requiring no extra care. Care is required in the control panel area on the rear of the cabinet. Be sure not to damage any switches or connectors.
The QSC shipping box should contain:
1- The 215PCM system or 215SB cabinet
2- This Owner’s Manual
3- Power Cord: 120 Volt, 30 Amp, 3 feet long (215PCM only) 4- QSC Signal Manager Software CD
WHERE DO I START?
For 215SB Subwoofer Only Users-
1- | Plug in your Speakon connection to the cabinet and use as any other passive subwoofer cabinet. |
2- | Refer to pages 31- 33 for Specifications and Performance Data. |
8
