QSC Audio MD-SP215 Location of Pick Points, Pick Pointssures are not equipped with handles

Location of Pick Points

There are fifteen (15) load-rated pick points on MD-LP enclosures; four each on the top and on the bottom, two each on the sides, and three on the rear of the enclosure.

There are sixteen (16) load-rated pick points on MD-SP enclosures; four each on the top and on the bottom, and four each on the sides.

These pick points are indicated with arrowheads on the illustrations. Note the pick points on the cabinet bottom or sides are not shown, but are identical to those indicated on the cabinet top (MD-LP) or the side shown (MD-SP).

As shipped from the factory, each pick point has a strength-rated flat head bolt installed. These bolts are load bearing components of the enclosure. Do not remove these bolts except to replace a bolt with a forged-shoulder eye bolt. If a flat head screw is lost, contact QSC’s Tech- nical Services department for a replacement.

Ensure all pick-point fasteners are installed and tightened to 40 in-lb (4.519 N-m) to maintain enclosure’s rated strength. Air leaks resulting from missing hardware will degrade the loudspeaker’s performance.

Use only 3/8-inch, 16 threads per inch forged shoulder eye bolts, QSC part number SR-000096-00. Contact QSC Technical Services department for complete information.

Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment for damage. Any missing, cor- roded, deformed, or non-load rated component could significantly reduce the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possi- ble short-term, unexpected overloading. Never exceed the rating of the hardware or equipment.

Consult a licensed, Professional Engineer regarding physical equipment installation. Adhere to all regulations regarding the safety and operation of flying equipment.

Pick Points

EN

Pick Points

Pick Points

Pick Points

4 additional Pick Points located on enclosure bottom.

NOTE! Handles are provided on black- colored enclo- sures only! White- colored enclo-

Pick Pointssures are not equipped with handles.

Pick Points

4 additional Pick Points located on enclosure bot- tom and 4 on the end not shown. No Pick Points on the rear of the MD-SP Series enclosures.

NOTE! Handles are provided on black-colored enclosures only! White-colored enclosures are not equipped with handles.

Pick Points

9