QSC Audio TD-000271-01 System Hookup Examples, Input Connections, Speaker Connections, Speakon

SYSTEM HOOKUP EXAMPLES

	INPUT CONNECTIONS	SPEAKER CONNECTIONS
		8 OR 4 OHM
	XLR
	MIXER	SPEAKON
	SIGNAL LEVEL SOURCE
		SET TO FULL RANGE
	¼
EN	MIXER	¼
	SIGNAL LEVEL SOURCE
		SET TO FULL RANGE
	PHONO	WIRE
	MIXER
	SIGNAL LEVEL SOURCE
		BANANA JACKS
		SET TO FULL RANGE

CONNECTION MULTIPLE SPEAKERS	If speakers have pass through jacks, do not put more than two in a chain.
	One 4-OHM speaker, or two 8-OHMspeakers, may be connected to each channel.
To connect two speakers to one amplifier channel,	8 OHM	8 OHM	8 OHM	8 OHM
connect one speaker with Speakon or 1/4 –inch jack,
and connect the other speaker with a banana plug
or wires to the binding posts.
It is also possible to use banana plug for one speaker,

and binding post wires for the other speaker.

Second speaker

First speaker

Speakon and wires to

the binding posts.

Second speaker

1/4 –inch jack,	First speaker
And wires to the
binding posts.

Second speaker

First speaker

banana plug and binding post

8 OHM 4 OHM 8 OHM 4 OHM

4 OHM 4 OHM 4 OHM 4 OHM