QSC Audio WL2082-I WL115-swConnections, Neutrik NL8FC Cable Connector Pinout, WL115-swInput Plate

WL115-sw Connections

Input Connections

The WL115-sw input connectors are a pair of Neutrik NL8's wired in parallel. See Table 3 or the WL115-sw Input Plate for connector pinout.

Note pin numbers 2+, 2-, 3+, 3-, 4+, and 4- are wired straight through from one connector to the other. This accommodates using one input cable assembly (where appropriate) for sub- woofer and full range loudspeaker connec- tions. Additionally, pin numbers 1+ and 1- of both NL8s are wired in parallel.

Neutrik NL8FC Cable Connector Pinout

Figure 22 shows the pin designations inside the Neutrik NL8FC connector. This information is for reference only. Diagram is of the connector as viewed from the wire- insertion end.

Figure 20: WL115-sw Input Plate

Table 3: WL115-sw Connector Pinout

PINConnection

1+ Low Frequency Transducer + (8 Ohms)

1- Low Frequency Transducer - (8 Ohms)

2+ Through

2- Through

3+ Through

3- Through

4+ Through

4- Through

Figure 21: Pinout table as printed on WL115-SW Input Plate

Figure22: NL8FC pin designations- Plug viewed from the wiring side.

12