Quadra-Fire 1100-I owner manual Listings and Specifications, Installation

LISTINGS AND SPECIFICATIONS

QUADRA-FIRE 1100-I pellet inserts are safety tested and listed with Warnock Hersey International to UL 1482, ULC S627, APFI,

and Oregon Administrative rules 814-23-900 through 814-23-909.

INSTALLATION

FASCIA OR TRIM

MASONRY AND ZERO CLEARANCE

A	Insert side to combustible	2” (50mm)
B	Insert top to mantel	9” (230mm)
C	Insert top to face trim	0” (0mm)
D	Insert side to face trim	0” (0mm)
E	Floor protection/hearth extension	6” (150mm)	Noncombustible material
F	Floor protection to the side of door	8” (200mm)	such as brick, tile, etc.

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS

WHEN INSTALLED AS A BUILT-IN

A	Top of inside shroud	2” (50mm)
B	Sides of inside shroud	2” (50mm)
C	Back of inside shroud	2” (50mm)
D	Vent pipe to combustible	3” (75mm)
E	Insert side to combustible	2” (50mm)

Page 6