Quadra-Fire 7068-112 Listing and Code Approvals, A. Appliance Certification, D. Specifications

Models: 7068-112

1 32
Download 32 pages 57.14 Kb
Page 6
Image 6
1 Listing and Code Approvals

R

Castile & Santa Fe CE Pellet Stove

1 Listing and Code Approvals

A. Appliance Certification

Model

Santa Fe or Castile Pellet Appliance

Type

Residential Space heating appliance fired

 

by wood pellets

Standard

EN 14785:2006

 

 

 

 

 

 

 

 

Hearth & Home Technologies

1445 North Highway

Colville, WA 99114

United States

2011

B. Glass Specifications

D. Specifications

Distance to Adjacent Com-

Standoff to Rear: 50mm

bustion Materials:

Standoff to Side: 160mm

CO Concentration at 13%

Max: 0.003

 

Min: 0.030

 

 

Flue Gas Temperature:

161oC

*Thermal Output:

Max: 6.3 kW

 

Min: 3.0 kW

Energy Efficiency:

Max: 75.1%

 

Min: 75.0%

Heating Capacity:

220m2 to 350m2

Hopper Capacity:

18 kg

Fuels:

Wood Pellets, less than

 

38mm in length, 6mm to

 

8mm in diameter

Shipping Weight:

109 kg, add 18 kg when

 

the hopper is full

This appliance is equipped with 5mm ceramic glass. Replace glass only with 5mm ceramic glass. Please contact your dealer for replacement glass.

C. Electrical Rating

230 VAC, 50 Hz, Start 2.80 Amps, Run 0.80 Amps

NOTE: Some generator or battery back-up systems may not be compatable with the micro-processor elec- tronics on this appliance. Please consult the power supply manufacturer for compatable systems.

NOTICE: Hearth & Home Technologies, manufacturer of this appliance, reserves the right to alter its prod- ucts, their specifications and/or price without notice.

*Thermal output will vary, depending on the type of fuel you use in your appliance. Consult your Quadra-Fire dealer for best results.

WARNING! Risk of Fire! Hearth & Home Technologies dis- claims any responsibility for, and the warranty and agency listing will be voided by the above actions.

DO NOT:

Install or operate damaged appliance

Modify appliance

Use as an incinerator or any other different way from which it was conceived

Install other than as instructed by Hearth & Home Technologies

Operate the appliance without fully assembling all components

Overfire

Install any component not approved by Hearth & Home Technologies

Install parts or components not Listed or approved.

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.

For assistance or additional information, consult a qualified installer, service agency or your dealer.

Quadra-Fire is a registered trademark of Hearth & Home Technologies

Page 6

7068-112

August 19, 2011

Page 6
Image 6
Quadra-Fire 7068-112 Listing and Code Approvals, A. Appliance Certification, B. Glass Specifications, D. Specifications