Chapter 6 Managing the File System
Performing Stripe Group Movement
StorNext User’s Guide 167
Figure 113 Stripe Group Move
Status Screen
2When the move status is Success, mark the source stripe group as
“down” and then restart the file system.
3If the status is Failed, click the link to determine the cause of failure.
If desired, retry the move.
Reusing LUNs in a Data
Stripe Group After a
Move 6
If you want to reuse LUNs in the data stripe group used in a successful
move, you must follow these steps:
1Mark the stripe group as “Down” as described in Modifying a Stripe
Group on page 117.
2From the command line interface, rename the LUNs in the downed
stripe group. (You cannot accomplish this step through the GUI.)