Making Connections (Power & Test Signals)
AC Mains | Rear View of | Blank module for Model 822S | |
Video Module - Monochrome Output | |||
Model 822S | |||
Input & Switch | Blank module for Model 822S | ||
| |||
85 - 264 VAC |
|
| |
48 - 440 Hz Sine | Analog Video Output | Analog Output Level | |
300 Watts Max. | 50 Ohm Differential | Calibration Inputs |
Pixel Clock Outputs | User positionable Frame Sync | ||||
Output (75 Ohm - TTL) |
|
|
| ||
|
|
| |||
50 Ohm Differential ECL | Composite Sync Output | ||||
Start of Line Pulse Output | |||||
(75 Ohm - TTL) |
| ||||
75 Ohm - TTL Level | Vertical and Horizontal | ||||
| |||||
Start of Frame Pulse Output | Sync Outputs (75 Ohm - TTL) | ||||
75 Ohm - TTL Level |
|
|
|
| |
NOTES:
1)AC Mains power must be turned off while removing or installing any module. Failure to do so may cause damage to the mainframe and/or module. Such damage is not covered by the product or service warranties.
2)All modules contain electrostatic sensitive components. Proper static prevention measures must be followed while handling the modules.
3)The Main Module must always be used in the bottom most slot of the mainframe.
4)The Sync Module must always be used in the second slot from the bottom of the mainframe.
Page 2 | Model 822S Quick Start Guide |
