Quatech IN5420 quick start February, Kit Contents, What you will need, Quick Start Guide

Quick Start Guide

AirborneDirect™ Industrial Serial Device Server

ABDG-SE-IN5410/IN5420

Revision v2.1

February 2011

Document Number: 100-8106-210

Kit Contents:

Upon receiving the kit please check that you received the following:

∙ABDG-SE-IN5410 or ABDG-SE-IN5420 Unit

∙2dBi, 2.4Ghz 50 ohm, omni-directional antenna

∙Quick Start Guide

∙5 VDC power supply (optional, included only if ordered as an accessory)

∙Airborne Direct software and documentation CD

If any of the above contents are missing or appear damaged please contact Quatech Sales support directly at (800) 553-1170or support@quatech.com.

What you will need:

To evaluate the unit you will need the following components and facilities:

∙ABDG-ET-IN50X0 unit with included antenna attached.

∙Laptop or desktop system with an Ethernet port.

∙5-36 VDC power for terminal block attachment, or an AC power outlet for optional ABDG-SE-IN5410/IN5420 power supply.

∙802.11b/g network for testing the unit, either AdHoc or Infrastructure (Access Points) mode. The test network configuration must be known. Required information will include:

o SSID (Wireless network name).

o Security settings (WEP, WPA, WPA2, etc.).

o Security credentials (passphrase, key or certificates).

o Static IP address, Subnet Mask and Gateway address if static IP addresses are used on the test network.

∙A web browser on the laptop top or desktop (MS Explorer, Firefox, Opera and Chrome v4.0 are supported).

∙CAT5 Ethernet cable for connecting the Airborne™ device to the laptop or desktop.

∙Serial cable to connect Airborne™ device to host system.