AirborneDirect™ Serial Device Server Quick Start Guide | Quatech, Inc. |
| Step |
|
| Description |
|
|
|
|
| ||
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Select Wireless LAN Connection Type |
|
| If you are using Access Points make sure this is set to | |
|
|
|
| Infrastructure from the drop down menu. | |
|
|
|
| If you want to use AdHoc set this accordingly. Additional | |
|
|
|
| settings may be required to fully configure for AdHoc mode. | |
|
|
|
| Please refer to the User’s Manual for details. | |
|
|
|
|
| |
| Select SSID |
|
| Enter the name of the wireless network you wish to access. This | |
|
|
|
| field is case sensitive. | |
|
|
|
|
| |
| Select Wireless LAN Security Type |
|
| Select the security type the wireless network you wish to access | |
|
|
|
| is using. Depending upon the option you choose you may have | |
|
|
|
| to enter additional information. Once you have selected the | |
|
|
|
| security type the required inputs will be made accessible by un- | |
|
|
|
| graying the fields that must be completed. | |
|
|
|
| If the security type is not in the available selections, more are | |
|
|
|
| available in the WLAN Security Settings page. If you choose to | |
|
|
|
| use this page make sure you commit the changes you have | |
|
|
|
| already made before moving to the WLAN Security Settings | |
|
|
|
| page. | |
|
|
|
|
| |
| Select WLAN DHCP |
|
| If your WLAN network uses DHCP to assign IP addresses to the | |
|
|
|
| wireless clients, select Enabled from the drop down menu. | |
|
|
|
| If you are using static IP addresses select disabled from the | |
|
|
|
| drop down menu. WLAN Static IP and WLAN Subnet Mask | |
|
|
|
| will need to be entered. | |
|
|
|
|
| |
| Select Ethernet DHCP |
|
| If the Ethernet network connected to the Ethernet port uses | |
|
|
|
| DHCP to assign IP addresses to the wired clients, you should | |
|
|
|
| select Enabled from the drop down menu. | |
|
|
|
| If you are using static IP addresses you should select Disabled | |
|
|
|
| from the drop down menu. Ethernet Static IP and Ethernet | |
|
|
|
| Subnet Mask will need to be entered. | |
|
|
|
| Important: This field is only used if the Ethernet interface is | |
|
|
|
| set as a client (default for Serial devices). If set as a router the | |
|
|
|
| field is ignored. See the User’s Manual for a full description of | |
|
|
|
| configuring the unit as an Ethernet router. | |
|
|
|
|
| |
| Select WLAN Static IP |
|
| This field defines the static IP address for the wireless interface. | |
|
|
|
| This address is only used if the WLAN DHCP is disabled or | |
|
|
|
| DHCP failed. | |
|
|
|
| Default: 192.168.10.1 | |
|
|
|
|
| |
| Select WLAN Subnet Mask |
|
| This field defines the subnet mask used by the wireless | |
|
|
|
| interface. | |
|
|
|
| This mask is only used if the WLAN DHCP is disabled or DHCP | |
|
|
|
| failed. | |
|
|
|
| Default: 255.255.255.0 | |
|
|
|
|
| |
| Select Ethernet Static IP |
|
| This field defines the static IP address for the Ethernet | |
|
|
|
| interface. When configured as a serial device server (Ethernet | |
|
|
|
| interface is in client mode) this address is only used if the | |
|
|
|
| Ethernet DHCP is disabled or DHCP failed. | |
|
|
|
| Default: 192.168.2.100 | |
|
|
|
|
| |
| Select Ethernet Subnet Mask |
|
| This field defines the subnet mask used by the Ethernet | |
|
|
|
| interface. When configured as a serial device server (Ethernet | |
|
|
|
| interface is in client mode) this mask is only used if the | |
|
|
|
| Ethernet DHCP is disabled or DHCP failed. | |
|
|
|
| Default: 255.255.255.0 | |
|
|
|
|
| |
| Press Commit [Button] |
|
| Saves changes to the device. | |
|
|
|
|
| |
| Optional |
|
| Reloads the Express Settings page. Select this is you have | |
| Press Reload [Button] |
|
| further configuration options to change. | |
|
|
|
|
|
|
5 | February 2011 |