Quatech ESC-100 user manual QTPCI.EXE Expert Mode display

I/O regions, etc. Pressing the "N" key will show similar information for all non-Quatech PCI devices in the system, including those devices integrated on the motherboard. In this example, the "Base addr 0" resource is reserved.

For users interested in even more details, PCI BIOS information can be displayed by pressing the "B" key. Pressing the "I" key displays the PCI interrupt routing table.

Quatech PCI Configuration Information Display Software

Version 1.00

Quatech PCI adapters detected
---------------------------------------------
ESC-100d eight-port RS-232 adapter
Vendor ID 0x135c, Device id			0x0050	found in slot 0x04 on bus 0x00
Device/function code = 0x98,			Revision ID = 0x01 (Hardware revision A1)
PCI Class Code = 0x070200			Communications controller, multiport serial
Subsystem Vendor ID 0x135c, Subsystem Id 0x0050
INTA# mapped to IRQ 11 (route 0x61)
Base addr	0 =	0xfc80	I/O	0X80 bytes allocated
Base addr	1 =	0xfe80	I/O	0X40 bytes allocated
_

Q - Quatech PCI adapters	M - Change to Basic Mode
N - Other PCI devices	B - PCI BIOS details
X - EXIT	I - Interrupt routing details

Figure 15 --- QTPCI.EXE Expert Mode display

Quatech ESC-100 User's Manual 24