OS/2 | Quatech ESC-100 manual

7 OS/2

The OS/2 device driver supports up to 32 serial ports in a system. Installation is a manual, but simple, process. Please refer to the read me documentation included on the Quatech COM CD with the device driver for full installation and configuration details.

Quatech ESC-100 User's Manual

Page 25

Image 25

Contents

ESC-100 Warranty Information Page Declaration of Conformity Base Address and Interrupt Level IRQ Address Map and Special RegistersEnhanced Serial Adapter Identification Viewing Resources with Device Manager General Information Connector Type IND Option --- Surge Suppression Upgrade Features Factory Default Configuration Hardware ConfigurationEnable Scratchpad Register SPAD, J4 Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J1-J3 Jumper/connector locations Hardware Installation Port Address Range Interrupt Status Register Enabling the Special Registers Bit Name Description Options Register RR1 RR0 Clock Rate Multiplier Windows Millennium Windows Configuration Windows Windows Windows Windows NT Viewing Resources with Device Manager Page DOS and other operating systems DOS and Other Operating Systems QTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections ESC-100D Connector Pinouts ESC-100D Channel Output Configuration ESC-100D Output Connectors CTS DSR ESC-100M only INTA# PCI Resource Map 10Specifications Maximum Load pF Data Rate 10% 15% 20% 25% Kbaud Trans Time Computer will not boot up Troubleshooting ESC-100D/M Revision March

Quatech ESC-100 user manual OS/2

Models: ESC-100

7 OS/2