The QTPCI program is capable only of displaying the PCI configuration. It
cannot be used to make changes.
Quatech PCI Configuration Information Display Software
Version 1.00
INSTRUCTIONS:
Press keys listed in the menu at the bottom of the screen.
This program only displays information. It cannot make changes
PCI BIOS detected, version 2.10 |
| |
Quatech PCI adapters detected |
| |
| ||
(Hardware Revision A1) | ||
Uses IRQ 11 |
|
|
Base addr 1 = 0xfe80 | I/O |
|
_ |
|
|
Q - Quatech PCI adapters | M - Change to Expert Mode |
N - Other PCI devices |
|
X - EXIT |
|
Figure 14 --- QTPCI.EXE Basic Mode display
Figure 15 shows the Expert Mode display for the ESC-100 after the "Q" key has been pressed. The information from the Basic Mode display is presented along with more details such as the Vendor and Device IDs, PCI Class Code, size of memory and
Quatech | 23 |
