Quatech QSP-200/300 user manual

Adapters" group or the QSP-200/300 model number does not appear, contact Quatech Technical Support for further assistance.

6.Click on the ‘Quatech QSP-200/300 PCMCIA Four-Port RS-422/465 Serial Adapter’ item and then click on the button labeled "Properties".

7.Un-check the box "use automatic settings". This keeps Windows from changing the resource settings when the system is restarted.

8.Select a "Basic Configuration" from the list box. Each "Basic Configuration" is associated with a specific set of handshake and output driver options as listed in the table below (a functional description of these options are contained in the section Hardware Information).

9.If a change in I/O address and / or IRQ setting is required, select the resource to be modified (I/O or IRQ) and select "Change Settings". Make the desired changes and then click on "OK". A shutdown of the system may be required to allow the settings to change. If prompted for a shutdown, select the option which restarts Windows 95.

10.The QSP-200/300 will be automatically reconfigured to the desired settings.

11.The card is now ready for use.

QSP-200/300 User's Manual 11