Quatech QSP-200/300 user manual Windows 95/98, Window Millennium ME

2.1 Installing a Quatech QSP-200/300 Under Windows 95/98/ME/2000

2.1.1Windows 95/98

1.Insert the QSP-200/300 into any available PC Card socket.

2.The first time a new PC Card is installed the Add New Hardware Wizard window opens. After the first installation, Windows 95/98 will automatically detect and configure the card. If the Add New Hardware Wizard window does not open, then skip to the next section, "Viewing the QSP-200/300 Settings".

3.The Add New Hardware Wizard window provides several options to configure the QSP-200/300 card. Click the "Driver from Disk" option button. Click "OK" to continue.

4.Insert the QSP-200/300 Quatech COM CD into the drive, select the correct drive letter, and click "OK". Windows 95/98 will browse for the aforementioned files.

5.During the installation process, it may be required to supply the computer with the Windows 95/98 CD. Insert the CD when prompted and click "OK"

.

IMPORTANT NOTE:

If the user has previously used any of the PC's COM ports and the Windows 95/98 installation CD is not available, the user may be able to skip this step. When prompted for the Windows installation CD, click the "Skip" button to abort copying of the serial communication drivers. If these drivers are already present on the PC, the currently installed drivers will be used.

6.The QSP-200/300 PC Card should now be configured. In the future, Windows 95/98 will automatically recognize and configure the QSP-200/300.

2.1.2Window Millennium (ME)

1.Insert Quatech COM driver CD into the CD-ROM

2.Insert the QSP-200/300 into any available PC Card socket.

3.The ‘Add New Hardware Wizard’ will open. Select ‘Automatic search for a better driver’

Windows Millennium will automatically search a install the correct driver for this device.

2.1.3Windows 2000

1.Insert Quatech COM driver CD into the CD-ROM

QSP-200/300 User's Manual 3