| MAINTENANCE / SPECIFICATIONS | |
SPECIFICATIONS: |
|
|
|
|
|
System operating voltage |
| 120vac +/- 20% @ |
Maximum Switching amperage |
| |
Overload protection |
| |
Operating temperature |
| 0 - 50’ C / 32 - 122’ F |
Maximum humidity |
| 95% RH |
Temperature control range |
| |
Humidity control range |
| 20 - 80% RH with a 5% differential |
Adjustable timer repeatability |
| |
Timer setting accuracy |
| +/- 5% |
Hydro “ON” timer |
| 1 second to 40 minutes |
Hydro “OFF” timer |
| 1 minute to 8 hours |
CO2 Inject duration timer |
| 1 second to 40 minutes |
CO2 Inject frequency timer |
| 1 minute to 8 hours |
| +/- 3% monthly | |
Dimensions |
| 10” X 8” X 7” |
Weight |
| Less than 6 lbs. |
Relay operations |
| Minimum 100,000 electrical / 10,000,000 mechanical |
MAINTENANCE:
1)Consult the troubleshooting chart for a listing of the most common problems.
2)DO NOT open the enclosure!!! There are no components that require maintenance.
3)Do not use this equipment for purposes other than what it is designed for. It will provide many years of
4)In the event you cannot solve the problem, first consult the dealer who sold the unit then contact the factory for instructions on how to return it to the factory for repair.
PUBLISHED BY R & M Supply INC.
COPYRIGHT 2008 BY R & M Supply
ALL RIGHTS RESERVED.
Liability statement:
R & M Supply and their retailers and distributors are not responsible for any damage or injuries (consequential or otherwise) arising from the use of this device. The purchaser assumes all responsibility for the use and proper installation of this device.
Page 10
