Radio Shack 12-258 SELECTING/CHANGING A FIPS CODE, LOC, LOC1, SINGLE LOC, SINGLE LOC, AREA SELECT, ALL LOCATION, ALL LOCATION, MULTIPLE LOC, ALL LOCATION

Weatheradio the Programming

You can set the Weatheradio to work with FIPS codes in one of three ways.

ALL LOCATION — the Weatheradio receives all SAME alert signals broadcast within about a 50-mile

radius. The Weatheradio automatically selects ALL LOCATION the first time you turn it on.

SINGLE LOC — the Weatheradio receives a SAME alert signal for one FIPS code programmed in memory location 1.

MULTIPLE LOC — the Weatheradio receives a SAME alert signal for up to 15 FIPS codes programmed in multiple locations in the Weatheradio’s memory.

1.When AREA SELECT appears, pressÞ . The currently selected FIPS mode (ALL LOCATION,

2.Repeatedly pressß or Ü until the FIPS mode you want appears, then pressÞ .

and you have not programmed the Weatheradio with a FIPS code, LOC1 ------

appears. Otherwise, LOC, the memory location number, and FIPS code already programmed into that memory location appears. Go to Step 3.

•If you selected ALL LOCATION, the radio beeps and AREA SELECT appears. Go to Step 8.

3.If you selected SINGLE LOC, go to Step 4. Otherwise, repeatedly pressß or Ü to select the memory location where you want to store a FIPS code.

4.To add a FIPS code or change the displayed FIPS code, pressÞ . The FIPS code’s first digit flashes.

5.Repeatedly press Ý orÞ to move the cursor backward or forward to the digit to be changed,