•If you selected TEST, pressÞ to select one of the following specific alerts:

ALL TEST

DEMO MESSAGE

 

 

MONTHLY TEST

WEEKLY TEST

 

 

3.PressÞ . TONE ON (if the Weatheradio is set to sound a tone during that alert) or TONE OFF appears (if the Weatheradio is set not to sound a tone during that alert).

4.Repeatedly pressß or Ü to select TONE ON or

TONE OFF for the specific alert you selected, then pressÞ .

5.To select another alert type and specific alert, press Ý then repeat Steps 2–4. Otherwise, press MENU or wait about 45 seconds without pressing any key.

SELECTING A CHANNEL

The Weatheradio automatically searches for and tunes the strongest weather broadcast channel in your area the first time you turn it on.

Follow these steps to automatically select a channel or select a channel manually.

1.When SELECT CH appears, pressÞ . AUTO appears.

2.Repeatedly pressß or Ü to select AUTO or MANUAL channel setup. Ô

To set the Weatheradio so it automatically searches for channels, pressÞ when AUTO appears. CHANNEL and SEARCHING ... appear.

If there is an available channel, CHANNEL and the number of the currently selected channel and AVAILABLE appear. If there is no available channel, NO CHANNEL, AVAILABLE, and BACK TO CHANNEL and the number of the currently

Ô NOTE Ô

•If you receive a NOAA broadcast on more than one channel, the one with the best reception might not be the one broadcasting information for your location. Contact your local RadioShack store or the NWS to find out which frequency NOAA is using to broadcast from the station nearest your location, then select that channel in Step 2.

•If you manually select a channel and the Weatheradio loses power, the Weatheradio does not search for the channel again. It stays on the channel you selected before.

Programming the Weatheradio

19