Radio Shack 12-258 ENABLING/DISABLING, ALERT TONES

then repeatedly pressß or Ü until the desired digit appears. Then pressÞ .

For example, if 155300 appears and you want to change it to 153300, pressÞ twice then press Ü

twice.

To erase a displayed FIPS code, hold down Ý for about 1 second. The cursor returns to the first digit.

6.Repeat Step 5 for each digit you want to change or add. Then pressÞ when the last digit flashes. The radio beeps and saves the FIPS code.

7.If you selected MULTIPLE LOC in Step 2, the FIPS code stored in the next memory location appears. Repeat Steps 3–6 for each additional FIPS code you want to add or change (up to 15).

8.When you finish programming the Weatheradio, press MENU or wait about 45 seconds without pressing any key.

ENABLING/DISABLING

ALERT TONES

The Weatheradio automatically sounds an alert tone during specific types of weather alerts. You can turn the alert tone on or off for each of these alerts. For example, you can turn off the alert tone for a volcano warning if you do not live near a volcano. Ô

1.When TONE DEFEAT appears, pressÞ .

2.Repeatedly pressß or Ü until the type of alert

you want to work with (WARNING, WATCH, STATEMENT, or TEST) appears, then pressÞ .

Ô NOTE Ô

The Weatheradio still detects and displays information about alerts even if you disable their alert tone.

Programming the Weatheradio

17