5/KP/3"(QQVDCNN"4GOQVG
| OWNER’S MANUAL — Please read before using this equipment. |
|
|
#"+/2146#06"#
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.
Rý— Warning | # — Important |
| ° |
Thank you for purchasing the RadioShack
. — Caution | — Hint |
± — Note |
|
±"016'"±"
•The remote’s function keys work the same as the ones on the original remote control supplied with your device. However, certain function keys, such as CH+ and
•To avoid damaging the video tape, you must press RECORD twice to begin recording.
."%#76+10".
• | Use only fresh batteries of the required size |
| and recommended type. |
• | Do not mix old and new batteries, different |
| types of batteries (standard, alkaline, or |
| rechargeable), or rechargeable batteries of |
TV/VCR/CBL — Selects the desired device type.
ENTER — Press after entering channel numbers (on some TV models).
TV/VCR — Switches the view between TV and VCR.
# — Rewind
J — Play
´ — Record ±
' — Stop
, — Fast Forward
PWR — Turns the selected device on or off.
CH+/CH–
Selects a channel.
VOL+/VOL–
Adjusts the volume.
MUTE — Turns the sound off or on.
SET — Initiates programming mode.
f— Pause
different capacities. |
• If you do not plan to use the remote control |
for a month or longer, remove the batteries. |
Batteries can leak chemicals that can |
destroy electronic parts. |
• Rechargeable batteries are to be removed |
from the toy before being charged. |
• Rechargeable batteries are only to be |
charged under adult supervision. |
• Batteries are to be inserted with the correct |
polarity. |
• Do not |
• Remove exhausted batteries from the toy. |
• Do not attempt to charge |
batteries. |
R"9#40+0)ýR"
Dispose of old batteries promptly and properly.
+056#..+0)"$#66'4+'5
Your remote requires two AA batteries (not supplied) for power. For the best performance and longest life, we recommend RadioShack alkaline batteries.
.
1.Unseal the flap on the remote, then pull out the battery compartment.
2.Use a Phillips screwdriver to loosen the screw on the battery compartment cover, then remove the cover.
3.Place two AA alkaline batteries in the
compartment as indicated by the polarity symbols (+ and
4.Replace the cover and secure it with the screw.
5.Replace the battery compartment and seal the flap.
6.When the remote stops operating properly, replace the batteries within 10 minutes of removing the old batteries.
Otherwise, the programmed settings and codes will be lost. R
241)4#//+0)"6*'"4'/16'
While programming, make sure to aim the | See “Code List” on Page 3 and write down | |
remote at the device and that the distance | the codes for your device. | |
between the remote and device is within 21 | 1. Manually turn on your TV, VCR, or | |
feet (7 meters). | ||
cable converter. | ||
|
© 2002 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.