Ô NOTE Ô

•Some TVs do not have an RCA or S-Video jack, they only have a coaxial antenna jack. In this case, you must purchase an RF modulator (not supplied, available at your local RadioShack store).

•When you connect the DVD player to a TV, the DVD player’s display and speakers remain on. To turn off the display, slide OFF/ ON under the screen to OFF.

•You may turn the DVD player’s volume to the minimum level when listening to the TV’s speaker.

Connections Other

If not, match the supplied cable’s yellow connector to the VIDEO connection, red to AUDIO RIGHT, and white to AUDIO LEFT.Ô

CONNECTING TO A TV AND AMPLIFIER

You can also connect the DVD player to a TV and to a stereo amplifier to enjoy high quality stereo sound.

1.Connect the supplied A/V cable’s two-plug end to the OUTPUT VIDEO / AUDIO jacks on the back of the DVD player.

2.Connect the supplied A/V cable’s three-plug end to an A/V cable (not supplied). Connect the yellow (VIDEO) cable to VIDEO IN on your TV. Connect the red connector (AUDIO RIGHT) and white connector (AUDIO LEFT) to your A/V receiver.

12