BASIC INSTALLATION
For a graphical view of the installation, see the Quick Start.
INSTALLING THE DVD PLAYER
IN A VEHICLE
1.Make sure the DVD player is securely fastened in the carrying case.
2.Pull down the panel on the back of the carrying case and reattach it, aligning the velcro strip to the catch panel.
3.Attach one of the supplied straps to the carrying case and hang the strap over the back of the headrest.
4.Attach one strap to each loop on the bottom of each side of the carrying case.
5.Wrap the straps around the bottom front of your seat and attach them together. The configuration varies depending on your car seat.
6.Secure the DVD player by adjusting the straps to the appropriate length for your car seat.
CONNECTING VEHICLE BATTERY POWER
You can power the DVD player from your vehicle’s 12V power source (such as a
1.Unzip the middle zipper on the carrying case to insert the adapter plug into the jack.
2.Connect the supplied DC adapter cord’s barrel plug to the DC IN jack on the back of the DVD player.
3.Connect the other end of the adapter to the vehicle’s cigarette lighter socket. !
CONNECTING HEADPHONES
The DVD player has two
1/8 inch (3.5 mm) plug(s) into the s1 and/or s2 jack(s).Ô
Basic Installation
CAUTION•You must use a power source that supplies
! IMPORTANT !
To avoid draining your car’s battery power, do not leave the DVD player on or the DC adapter connected to the cigarette lighter when your vehicle is not running.
Ô NOTE ÔThe
9