Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting

43-5521.fm Page 17 Monday, June 5, 2000 12:29 PM

2.Hold down MEM until Memory Store and a list of memory location numbers appear.

3.Press a number (01-20) or press VOL/ CID 8 or 9 to choose a two-digit mem- ory location. Precede a single digit loca- tion number with 0 — 01, 02, 03, and so on.

4.To store a name, press SELECT/CHAN- NEL. Store Name appears.

If you do not want to enter a name, skip to Step 6.

5.To enter a name, press VOL/CID 8 or 9 to select the characters and 6 or 7 to move the cursor.

Repeatedly press VOL/CID 9 to view the characters in alphabetical order. (The display shows uppercase letters first, then lowercase letters, numbers, and special characters.)

Notes:

•Press VOL/CID 8 to see the charac- ters in reverse alphabetical order.

•You can hold down VOL/CID 8 or 9 to scroll rapidly through the charac- ters.

•If you make a mistake, move the cur- sor over the error, then enter the cor- rect character, or press DEL to delete a character. To delete all the charac- ters, hold down DEL for at least 1 sec- ond.

6.Press SELECT/CHANNEL. Store Num- ber appears.

7.Enter the phone number and any tone or pause entries (see “Using Tone Services on a Pulse Line” on Page 14 and “Enter- ing a Pause” on Page 18).

8.Press SELECT/CHANNEL. The phone beeps and Memory nn Stored appears (nn is the location number you selected). After 2 seconds, Memory Store appears. Repeat Steps 3–8 to store more numbers.

9.When you finish, press MEM.

To replace a stored number, store a new one in its place.

Editing or Deleting a Number in Memory

Follow these steps to edit or delete a memo- ry number.

1.Lift the handset.

2.Hold down MEM until Memory Store and a list of memory location numbers appear.

3.Choose a memory location (01–20) by

pressing a number or by repeatedly pressing VOL/CID 8 or 9 to view the names.

4.Press SELECT/CHANNEL. A menu

appears with the three options listed below. Press VOL/CID 8 or 9 to high- light the desired option then press

SELECT/CHANNEL to choose it.

Edit Memory nn - edit the record as described in Steps 5 through 8 of “Stor- ing a Number and Name in Memory” on Page 16.

Delete Memory nn - the display

prompts you to confirm the deletion. Press VOL/CID 8 to move the cursor to

Yes, then press SELECT/CHANNEL or

DEL. The phone beeps, and Memory nn Deleted appears.

Go Back - returns you to the list of memory numbers.

Operation 17