Radio Shack 20-136 PRO-136 quick start Advanced Programming, Cloning Your Scanner

Advanced Programming

Advanced Programming

You can clone your scanner by transferring the programmed data to or from another PRO-136 scanner using a connecting cable. You can also upload or download programmed data from a PC through wired programming.

Cloning Your Scanner

You can clone all the frequencies in	PC/IF Jack
your PRO-136 to another PRO-136 or
PRO-135 using an optional interface
cable with 1/8-inch phone plugs on
both ends.

1.Make sure the scanners are turned off and then plug the cable into each scanner’s PC/IF jack.

2.Turn on both scanners. WirEd and PGM appear.

PGM

3.Press T or S on the scanner from which you want to send frequencies. This is the “master unit.” The receiving scanner is the “slave unit.”

4.Press ENT/PROGRAM on the master unit to send the data. SEnd and the transfer progress are displayed in the master unit.

BANK0 1 2 3 PGM

22