13
Searching
Storing Frequencies Found During a Search
To store frequencies you find in a fine tune or service bank search:
1. Press PSE at the frequency you want to store.
2. Press ENT/PROGRAM to enter programming mode.
3. The screen flashes, alternating between the smallest empty channel
number in the current bank, 000.000, and the frequency you want to
store.
BANK0123456789 PGM
4. If you want to change the bank, enter the bank number using the
number keys.
Note: If there are no empty channels, the scanner selects the first
channel in the bank.
5. If you want to change the channel, Press T or S.
6. Press ENT/PROGRAM to store the frequency or •/CLR/DELAY to
cancel.
Note: If the same frequency already exists on another channel, the
scanner beeps and displays that channel. Press •/CLR/DELAY to
cancel, or press ENT/PROGRAM to store the frequency in both
channels.
Search Skip Memory
You can skip up to 50 unwanted frequencies during a fine tune or service
bank search.
Note: You cannot skip frequencies during WX service search.
To skip a frequency, press L/O when the scanner stops on the frequency
during a search. The scanner stores the locked-out frequency in memory and
automatically resumes the search.
To clear a single frequency from skip memory:
1. Press PSE to stop the search.
2. Press T or S to select the frequency. L/O appears.