Scanning

PGM

WX

3.Press T or S to select F0 to F14. If a FIPS code is not programmed,

------- appears.

4.Use the keypad to enter the FIPS code.

5.Press ENT/PROGRAM to store the FIPS code or press •/CLR/DELAY to clear inputted FIPS code.

PGM

WX

6.To set the scanner so it alerts you when you receive any FIPS code, press T or S to select All FIPS, then press ENT/PROGRAM. The scanner returns to Weather Scan Pause Mode.

7.To set the alert only for one of the areas you have programmed, press T or S to select F0 to F14, then press ENT/PROGRAM. The scanner returns to Weather Scan Pause Mode.

To clear a FIPS code:

1.In FIPS Programming Mode, press T or S to select F0 to F14.

2.Press 0 and then press ENT/PROGRAM. ------ appears.

PGM

WX

Skywarn

The Skywarn function lets you jump directly to the last channel in memory (Bank 9, Channel 19) from any mode by pressing and holding WX/. The scanner goes into manual mode and starts receiving transmissions in the last channel.

18

Page 18
Image 18
Radio Shack 20-136 PRO-136 quick start Skywarn